Cerramagic - Magnetic door latch
AYR changes the door latch concept
the magical heart of a door
The latch for step door is an element to which never we paid attention but that we used to daily infinity of times.
AYR has improved substantially the operation of the traditional latch having incorporated new techniques that contribute
very significant improvements to the operation and the aesthetic one of the door.
This latch has like more outstanding advantages on the conventional ones:
its greater simplicity in the assembly, the invisibility of the slide and a smooth and quiet operation due to the lack
of frictions between the slide and the cerradero.
It has these characteristic thanks to a design that eliminates the uncomfortable frictions as well as the incorporation
in its mechanism of permanent magnetic components. Sentence device is designed for its possible use as.
It has been put under the most rigorous tests and tests that describe in the norm of application to this type of mechanisms
reaching the highest degree of use that describes the norm, which allows to guarantee the perfect operation us by more than 300,000 cycles.
Features magnetic latch:
Lock and unified measurements:
The latch is designed to be used in a normal door or with a door that can be locked (bathrooms, bedrooms, etc.).
Furthermore, the measurements between the bars and front correspond to the majority of standardised latches on the market.
Lathc with silent mechanism:
With a conventional latch or closing mechanism, the noise is produced by the sharp blow of the latch against the striking plate.
This blow is necessary so that the door closes.
However, with the magnetic latch, the action occurs when the lock pin reaches its anchor point, without making an annoying sound.
Simple groove for the striking plate:
The machining of the doorframe for the striking plate is simplified thanks to its more regular geometry
No need to change the hand:
The latch is symmetrical with respect to the vertical axis and therefore thereis no need to change the hand.
Durable and resistant:
It has been submitted to the most rigorous tests and trials described in the regulatio to be applied to this type of mechanism:
UNE 97-321-88 "Iron fittings for doors inlaying locks - trials".
After the tests and trial scarried out in our laboratories, the achieved result was "GRADE 4", the highest use grade described by the regulation.
The latch and striking plate do not protrude:
No part of the latch sticks out of the door or frame and so scrapes and snagging clothing are avoided.
Furthermore, it considerably improves the look of the door.