Cómo instalar tu AYR Lock Pro paso a paso
Guides & tips 4 min read

How to install your AYR Lock Pro step by step

Installation guide

How to install your AYR Lock Pro step by step

A smart lock that fits onto your door, with no building work and no keys. We make it easy, in 8 steps.

AYR Lock Pro smart lock in black
⏱ 30–45 min 🔧 Difficulty medium 🚪 Wood · metal · armoured 📱 App AYR Integra

AYR Lock Pro is a surface-mounted smart lock: it is installed on top of your existing door and controlled from the AYR Integra app. It uses no physical keys, and you can open it from your phone, from the lock itself or with an optional remote control.

In this guide you'll find the essentials for installing it and getting it ready to use. Ready? Let's get started.

Before you start


Three quick checks that will save you trouble:

📏

The key measurement: the gap between the lock and the strike plate (frame) must be between 10 and 24 mm. This is the most important compatibility factor.

🌡️

Where to install: indoors only. Avoid humidity or extreme temperatures, dust, direct sunlight, rain or fire.

What's in the box:

1Lock
2Strike plate
39V lithium battery
4Sheet-metal screws (x8)
540mm wood screws (x4)
650mm wood screws (x4)
7Spacer shims (x6)
8Installation templates
9Pairing tool
10Instruction manual
🛠️ Tools: drill, ø4 bit (wood) or ø5 bit (metal/armoured), screwdriver, chisel, hammer and tape measure.

Installation in 8 steps


1

Choose the position

Recommended height: 1.6 m from the floor. If you fit it elsewhere, note down the measurement. Remember to keep the gap between the lock and the strike plate between 10 and 24 mm.



2

Position templates A and B

Peel off the adhesive backing and place them in line, keeping the 10–24 mm gap.

3

Mark the strike plate

If the frame protrudes, use template B to mark where the strike plate fits.

4

Drill the holes

ø4 bit for wood, ø5 for metal/armoured. Do not drill deeper than the thickness of the door.

5

Remove the trim covers

From the lock and the strike plate, to access the fixing points.

6

Level up with the shims

Even out the height between door and frame with the shims before screwing.

7

Screw it in place

Wood: no. 5 (lock) and no. 6 (strike plate). Metal/armoured: no. 4 for both.

8

Covers and battery

Refit the covers, insert the 9V lithium battery supplied and close the battery cover.

⚠️

Battery: always use the recommended lithium battery. Never use alkaline or rechargeable batteries: they reduce battery life and can damage the device.

Set it up in the app


Once the lock is installed, link it to the AYR Integra app:

Set-up in 5 steps

  1. Download AYR Integra from the App Store or Google Play.
  2. Sign in with your phone number and verify with the SMS code.
  3. Create a location ("+" button → "Add new" → Save).
  4. Add the device: "+New" → "New device" → select Lock Pro.
  5. Activate it: using the pairing tool, press the hidden button for 10 s and tap "Continue".

You'll need: internet or mobile data, GPS and Bluetooth switched on, and mobile coverage for the SMS. The first user to register it becomes the administrator.

🌐

Access when you're away from home? To open remotely, send access via link or use voice assistants, add an AYR Nex to the same location.

Tips for getting it right


✅ Do this

  • Confirm the 10–24 mm gap from the start.
  • Use the right drill bit and screws for your door.
  • Even out the heights with the shims.
  • Check that it opens and closes before you finish.

⛔ Avoid this

  • Forcing the bolt by hand (it breaks the motor).
  • Drilling deeper than necessary.
  • Alkaline or rechargeable batteries.
  • Leaving the bolt rubbing against the strike plate.

Frequently asked questions


Can I install it myself?

Yes. It is a surface-mounted lock designed to be installed with basic tools. If you have doubts about your door, contact AYR support or an installer.

Do I need any building work?

No. It is installed on your existing door; you only drill the fixing holes for the screws.

What if my door isn't compatible?

What matters is that the gap between the templates is between 10 and 24 mm. If it falls outside that range, check with AYR support before installing.

How do I know it has been installed correctly?

Check that it opens and closes smoothly, without the bolt rubbing, and that the sensor detects the strike plate. Do this before leaving the room.

Can it be controlled from my phone?

Yes, from the AYR Integra app. For remote control beyond Bluetooth range, you need an AYR Nex in the same location.

Having a problem during installation?

Message our after-sales service on WhatsApp: +34 661 70 83 42. We'll help you sort it out straight away.

💬

Any other questions? We're here to help on our contact page or on WhatsApp at +34 661 70 83 42.

Protect what matters

AYR Lock Pro is part of AYR's connected security ecosystem. Make the move to a safer, simpler and more connected way of managing access to your home.

Discover AYR Lock Pro →

Best-selling AYR packs

    Ana López

    Written by

    Ana López

    Marketing & Communications Director at AYR

    View LinkedIn profile

    Keep reading

    ← Back to the blog